Building a fence is an exciting investment. It’s also one that you’ll be able to enjoy for years to come. However, installing it is a beast of a task, and you must be careful how you do it. There are various DIY fence installation mistakes you should avoid when you’re installing it. We’ll review some mistakes here and describe what you should do instead. If you want to learn more about it, read below. We have you covered.
You must plan when starting a new project, especially one as big as creating a new fence. You should know where it'll be specifically. You should also figure out what materials you want to use and how deep you’ll need to dig in the ground. If the fence post holes aren’t deep enough, they won’t be able to hold the structure of your fence. Your holes should be somewhere between 30 and 36 inches deep. Make sure you know all the installation steps ahead of time as well. This is a serious DIY fence installation mistake you’ll want to avoid.
Forgetting To Check Your Zoning Laws
Your neighborhood may not allow some fences. Additionally, there may be certain height restrictions, especially if you’re considering a privacy fence. You might need a permit before you begin building. Your municipality might require you to seek permission before you start as well.
Ensure you aren’t putting your fence on your neighbor’s land. Your homeowner’s deed should have all the information regarding where your property begins and ends. You don’t want to cause trouble; the smallest infraction can lead to a big problem between you and your neighbors. You can complete a land survey if you don’t have access to the deed.
Setting Posts Incorrectly
This could ruin the structure of your entire fence. Your posts guard against several things, including inclement weather and possible accidents. We don’t often think of fences as safeguards for our homes unless they’re privacy fences. But if an accident occurs at the front of your house, your fence is the first line of defense. It’s not enough to place the post deep into the ground, although that’s the first step. Pouring concrete and immediately setting your fence in it is a great way to reinforce it.
If you want to install your fence or do any DIY project, check out our pneumatic staple guns here at Salco. We’ll take care of everything you need. If you have any questions, contact us today!